Categories
Categories
Brands
Brands
- Home
- Cycling Gear
- Nathan Nebula Fire Headlamp w/ Crossover Kit
Nathan Nebula Fire Headlamp w/ Crossover Kit
Product Description
Nathan Nebula Fire Headlamp w/ Crossover Kit (Bike Mount & Body Clip)
The first ever headlamp designed specifically for runners, Nebula Fire is packed with features that will make your night runs safer. This lightweight, multi-beam, rechargeable headlamp comes in three exciting colors, and offers over 192 lumens of clean, eye-pleasing light. A powerful, customized LED disperses the perfect Run-Right Light for runners, blanketing both distance and proximity, creating a less tenuous night running surface. There are five lighting modes – low, medium, high, sprint, & strobe – with a maximum burn time of 25 hours.
Change light settings touch-free with Nebula Fire's RunWave technology – no more fumbling for buttons! The Nebula Fire also communicates your presence to drivers via AutoStrobe, as the on-device sensor reacts to cars' headlights and triggers the safety strobe mode. The breathable mesh strap fits comfortably on your head, while the adjustability of the headlamp allows you to easily find the perfect light angle for the trail or road.
- Rechargeable headlamp designed for runners
- 192 lumens with 5 lighting modes
- Run-Right Light™ combination of Spotlight & Floodlight
- RunWave™ technology to adjust settings touch-free
- Auto-Strobe™ communicates runner's presence to drivers
- LED: 1 LED, 192+ max lumens
- Battery: 1500 mAh Rechargeable Lithium-Ion Polymer battery
- Charge Time: 5 hours
- Minimum USB Charger Amperage: 0.5A
- Water Resistance: IPX4 – Weather resistant
- Adjustable headlamp angle
Settings
- Setting 1 (one blink) – Manual Control: Press the power button to cycle through the various lighting modes.
- Regulated Output – Strong light for periods of around 2 hours.
- Setting 2 (two blinks) - RunWave: Cycle through various lighting modes by swiping your hand in front of the sensor with RunWave.
- Unregulated Output – Stretch lighting performance over long periods as light output starts at 100% and slowly decreases
- Setting 3 (three blinks) - RunWave + AutoStrobe: Communicate your position to drivers with AutoStrobe, and cycle through modes touch-free with RunWave
- Unregulated Output – Stretch lighting performance over long periods as light output starts at 100% and slowly decreases
Lighting Modes & Burn Time
- Low – 16 Lu, 12m, 25 hrs burn time
- Medium – 80 Lu, 25m, 6.5 hrs burn time
- High – 160 Lu, 31m, 4.25 hrs burn time
- Sprint – 192 Lu, 41 m (Sprint mode availability resets after 3 minutes of running time)
- Strobe – 80 Lu
Usage Instructions:
- Press and hold the power button for three seconds to turn on and off
- The headlamp will blink one, two, or three times to tell you what mode is being used (1, 2, or 3)
- Press the setting button to change to a different setting
To Recharge
- Charge fully before first use
- Plug supplied USB cord in to a USB power source (allows charging from 110-220V wall outlet or car cigarette lighter outlet), then plug gently into the cover charge port on the device
- A red LED will light up to indicate charging is occurring, and a green light indicates the Nebula Fire is fully charged
- Recharge time is 5 hours for a fully depleted battery
- When fully charged, unplug Nebula Fire from USB power supply, return port cover gasket to original position and store charger cord until next use